Mindray TRIO Betriebsanleitung PDF herunterladen (Seite 132)

Trio™ Operating Instructions 0070-10-0666-01 4 - 9

User Maintenance Care and Storage of Thermal Paper

4.8 Care and Storage of Thermal Paper

Thermal chart paper is chemically treated and the permanency of the printout can be

affected by storage and handling conditions.

Conditions which may affect the integrity of the paper and printouts are:

• Ultraviolet Light

We recommend storing the printouts in a filing cabinet within a few days of printing. Long

term exposure to natural or artificial UV sources may be detrimental

• Storage Temperature and Humidity

Keep the printouts in a cool and dry area for a longer lasting image. Extreme

temperature and humidity (above 80 °F/26 °C and 80% humidity) should be avoided

• Solvent Reactions

Do not store the printouts in plastic bags, acetate sheet protectors and similar items made

from petroleum products. These products emit a small amount of vapor which will, over a

period of time, deteriorate the image on the chart paper

• Adhesive Tape

Never place adhesive tape over printouts. The reaction between adhesive compound and

the chemical/thermal paper can destroy the image within hours

•Archives

We recommend that if long term archives are required, make a photocopy of the

printouts as a back-up. Under normal office filing conditions the printouts should retain

acceptable image quality for about five (5) years

4.9 Care and Cleaning of ECG Cables and Leadwires

The recommended cleaning method for ECG cables and leadwires is as follows:

• Wipe using a cloth and ordinary alcohol-free hand soap or USP green soap tincture

• When disinfection is required, a cloth wipe using disinfectants such as isopropyl alcohol,

chlorine bleach in water (1:10 mixture) or 2% Glutaraldehyde solution (i.e. Cidex) is

recommended

• After cleaning, the ECG cables and leadwires should be wiped using a clean, damp

cloth. Dry the ECG cables and leadwires using a clean, dry cloth.

CAUTION: To avoid permanent damage, do not expose metal

components (pins, sockets, snaps) to disinfectants, soaps or

chemicals.

NOTE: ECG cables and leadwires must never be immersed, soaked

in any fluids, and they should not be cleaned with harsh

chemicals such as acetone or non-diluted bleach.

NOTE: Do not autoclave, radiation or steam sterilize ECG cables or

leadwires.

NOTE: Extended exposure to Ethylene Oxide gas may shorten life

of the ECG cables and leadwires, leading to poor signal

quality.

1 2 ... 127 128 129 130 131 132 133 134 135 136 137 ... 169 170

Keine Kommentare

Mindray TRIO Betriebsanleitung Seite 132